Tinyumbrella для windows 7 не запускается. Почему Tinyumbrella не запускается: все возможные причины и решение проблемы

01.07.2021 Проблемы

Tiny Umbrella – это приложение для обладателей мобильных устройств компании Apple. Этот софт является «спасательным кругом» для пользователей, которые очень часто тестируют обновления для iOS на мобильном аппарате.

Программа обеспечивает быстрый «откат» на струю версию версии iOS на мобильных аппаратах с Jailbreak. По сути, Tiny Umbrella делает «даунгрейд» операционной системы, сохраняя SHSH-ключи. В процессе восстановления до текущей версии «прошивки» вы не теряете важные данные.

Информация на устройстве не теряется, благодаря интегрированной опции, которая сохраняет SHSH-blobs, то есть, виртуальные ключи. Такой тип ключей установлен создателями Apple во всех сборках iOS.

Виртуальные ключи – это цифровые подписи, которые распознаются iTunes в процессе обновления прошивки. Без SHSH-blobs ключей обновление операционной системы на мобильном устройстве не возможно. В новой версии iOS есть новые улучшения и обновления, которые интересны большинству пользователей.

Эта утилита обеспечивает успешный «тест» новой сборки iOS на вашем смартфоне. TinyUmbrella обеспечивает обновление и проверку аппарата в течение нескольких часов. Вы подробно изучаете новые возможности операционной системы мобильного устройства до полной его разрядки. Если вы хотите протестировать систему и, возможно, вернуться на прежнюю сборку iOS – установите Tiny Umbrella.

Эта утилита «спасаёт» вас обеспечивает быстрый «откат» на старую систему. Tiny Umbrella пригодится любителям протестировать новые системы, а также для обычных пользователей, которые хотят изучить нововведения и понять нужна ли им эта версия iOS.
Вы можете запустить приложение на устройстве iPad, iPhone и iPod с iOS, начиная от версии 5.0. По сути, этот инструмент - универсальный, ведь активных пользователей iPhone 3G или более старых аппаратов, практически не осталось.

Создав «бекап» системы, вы «откатитесь» на старую iOS за десять минут. Возвращение на «конфиг» со старыми системными файлами осуществляется через iTunes. Не забывайте, что полноценная работа «Tiny Umbrella» на стационарном ПК доступна после инсталляции среды разработки JavaJRE.

Ключевые особенности

  • обновление системы на прошивке любых версий, начиная с iOS 5.0;
  • вы вернётесь на старую сборку iOS, нажав несколько раз мышью;
  • утилита создаёт архивные копии SHSH-ключей;
  • графический интерфейс приложения создан в удобной оболочке;
  • инсталляция обновлений и откат систем автоматизирован, и рассчитан на неопытного пользователя.

TinyUmbrella is one of the most powerful tools we have at our disposal. It was a tool that we once used for downgrading iOS firmware to an earlier version, mainly for the purpose of installing a jailbreak .

What is TinyUmbrella?

TinyUmbrella has many uses other than downloading Cydia. TinyUmbrella can be used for fixing iOS devices stuck in Recovery mode, fixing iTunes Error 3194 and more.

Download TinyUmbrella App:

The good news is, TinyUmbrella works on Mac OS and on Windows 7 through 10. Do make sure that you are running an up to date version of Java on your computer before you start, TinyUmbrella needs it to work.

Let’s dive in:

Click on the links below to download TinyUmbrella on your Windows or Mac computer:

It’s that simple

Later, we’ll be telling you how to use it but first

How TinyUmbrella Works:

Whenever you update your iPhone or iPad , a small piece of data is saved onto your device. This is the SHSH blob, and it contains information that relates to the firmware and your specific device. TinyUmbrella is used to save these SHSH blobs into an external file.

Because Apple only gives you a week to downgrade your device after you update it and, once that time is up, those SHSH blobs are wiped from your device. No SHSH blob, No Downgrade. By saving your blobs, you can then use TinyUmbrella to turn them into custom firmware for the relevant iOS version and, using iTunes, allows you to downgrade.

Cool, isn’t it? Let’s move on.

TinyUmbrella App Features:

TinyUmbrella is so simple to use and has many great features:

  • It’s free
  • Brand new interface for easier navigation
  • All iOS devices detectable and details saved in an external file
  • To remove a device, locate it in the app history and right click on it
  • TinyUmbrella will automatically detect and save SHSH blobs
  • All blobs saved into one file

We’re not done yet

TinyUmbrella has so many uses:

Fix Recovery Mode:

While it is easy to get your device into recovery mode, it isn’t always easy to get out if it. TinyUmbrella can help you without you having to restore your device and lose everything. Check out the link below for more information.

Save SHSH Blobs:

The SHSH blobs are what you use to downgrade your iPhone or iPad and saving them is simple with TinyUmbrella. Click the link to find out how:

Wait, there’s more

Downgrade iPhone and iPad:

There are a few reasons why you might want to do this and, with TinyUmbrella, you are not tied to when Apple says you can do it. Find out how to do it anytime by clicking the link:

How to Fix TinyUmbrella Not Working:

Most people have found TinyUmbrella to work smoothly, but some have found a problem with it. Users on Mac OS have found that either TinyUmbrella won’t open or, if it does, it just crashes immediately. Usually, there are error messages – one says “TinyUmbrella.app is Damaged” and another will ask you to sign in and this will require your Apple ID.

Annoying, isn’t it?

Don’t worry because these are simple to fix. The problem lies in the app security certificate; it has most likely expired and this is down to the DRM, not anything you have done.

Here’s how to fix these errors:

TinyUmbrella.app is Damaged:

It tends to be the more recent Mac OS X versions that this happens on:

  1. Reboot your Mac and try again; this may remove the error
  2. If not, delete TinyUmbrella
  3. Reinstall it and try again – it should all work correctly now

Fix Sign In To Use the Application:

This affects the older Mac OS X versions:

  1. Close the popup message telling you to sign in
  2. Reboot your Mac
  3. Open the Mac App Store and sign in using your Apple ID – this will authenticate your computer and all your apps
  4. Relaunch TinyUmbrella, and you should find it works just fine

Now things get a bit more complicated

Kill Mac Processes:

Another way of fixing errors is to kill off the storecountd processes, and this means going into Activity Monitor. Another way requires you to use a Terminal window on your Mac. If you are confident enough to do this, open a terminal and type in the following command:

Sudo killall -v storeaccountd

Mac OS runs two processes for this – root and user. Both are killed off with this one command.

Still got questions?

Frequently Asked Questions:

Then we’ll provide the answers

What Does SHSH Mean?

SHSH stands for Secure Signature Hash. It is a unique key, just a tiny bit of data that holds info about your firmware and device.

Why Do We Need Them?

They are the only way to downgrade your device outside of the time period that Apple allows – usually a week after a firmware is released.

What Is TinyUmbrella Used For?

This useful tool is used for several purposes – saving SHSH blobs, turning them into custom IPSW files, fixing recovery mode and much more besides. It’s main purpose though is to help you downgrade your iPhone or iPad.

I Get a “You Are Too Late” Message – why?

Two reasons – one, you may be trying to save SHSH blobs for a firmware that is no longer being signed by Apple and, two, you may not have enabled the Request SHSH from Cydia option. Check and enable it now.

Why Can’t I See My SHSH Blobs in Cydia?

Cydia creates a home page cache and refreshes it but it doesn’t do it very regularly. If you don’t see your saved SHSH blobs in Cydia, go to TinyUmbrella and check – if it says they are in Cydia, you’ve nothing to worry about. Just wait for Cydia to refresh again

I Am Running iOS x.x.x on My iPhone – Can I Restore all My Other iOS Devices to That Version?

You must save SHSH blobs while they are still being signed by Apple; if you don’t then you cannot restore to that firmware. Get into the habit of using TinyUmbrella every single time you update your device to use the blobs on all devices.

Why Does TinyUmbrella Need Java?

TinyUmbrella is written in Java and can only work with Java; it is one of the most straightforward programming languages for applications that are more complicated and it will run on multiple platforms.

SHSH, Blob or Signature?

Any one of them. All three of these are interchangeable – a blob holds the data in the SHSH, the SHSH is the data sequence that represents a hash of all the files in your firmware file and, collectively, when Apple signs the firmware, they are known as a signature.

Keep reading, there’s more

Why Does TinyUmbrella Require Admin Privileges?

For two reasons, both of which require admin privileges. The first is so that the app can modify the Mac or Hosts file and second, it needs Port 80 on your Mac or PC for listening.

What Is the Hosts File?

Nothing more than a simple file that maps hostnames to the relevant IP addresses.

TinyUmbrella Can’t Listen on Port 80 Or It Says it Needs a PID File Killing off. What Do I Do?

This is a common occurrence and it isn’t all that easy to fix. Here are the steps:

  1. Click on Start>Run
  2. Type MSC in the box and press Enter
  3. Look for an app in the list that is running on port 80 and stop it
  4. Download TinyUmbrella for Windows
  1. Open System Preferences>Sharing
  2. Disable Web Sharing
  3. Stop all programs that use Port 80
  4. Open a terminal window and type sudo lso -I:80 | grep LISTEN
  5. If an app starts up, type in sudo kill -9 $(sudo lsof -I:80| grep LISTEN | awk ‘{print $2})
  6. Download TinyUmbrella for Mac

How Do I Save My SHSH Blobs in Cydia:

Provided you enabled the option for Request SHSH from Cydia in Tiny Umbrella, all SHSH requests will be sent via Cydia and all saved blobs are in Cydia too. However, due to security issues, you cannot force Cydia to save older SHSH blobs.

I Get a 255 Error Showing in console.app on my Mac – What Do I Do?

This error causes TinyUmbrella to crash and it is all because of a lack of permissions. Fix it like this:

  1. Open a Terminal and type sudo chown – R $USER ~ sudo chmod – R u+rw~
  2. Now reinstall TinyUmbrella and it will work

And we’re done

TinyUmbrella app is one of the most useful tools ever, and you should be using it every time you update your iOS device firmware. Check out all the other links to see what other cool stuff TinyUmbrella can do and follow the developers on

На днях разработчик Notcom выпустил обновлённую версию инструмента TinyUmbrella, и сейчас мы вам расскажем как с его помощью можно сохранить сертификаты SHSH, которые в дальнейшем пригодятся для отката прошивки.

Если вы уже являетесь джейлбрейкером, а проще говоря не представляете свою жизнь без взломанного iPhone, iPad или iPod, то должны знать, насколько важны сохранённые сертификаты SHSH. Если вы только собираетесь познать все достоинства (и недостатки) джейлбрейка, вкратце расскажем. Сертификаты SHSH необходимы для того, чтобы иметь возможность отката (понижения) прошивки на более раннюю версию, которая поддерживается теми или иными инструментами для взлома.

Несколько лет назад Apple ввела «комплексную проверку верификации», которая сделала невозможным откат прошивки и теперь при попытке восстановить или обновить прошивку устройства, iTunes связывается с сервером Apple, отсылает туда специальный код прошивки и уникальный идентификатор чипа вашего устройства (ECID), а в ответ получает уникальную цифровую подпись (), без которой устройство не сможет загрузиться. Если эта прошивка ниже актуальной, то Apple её не подписывает и процесс обновления завершается ошибкой.

Чтобы обойти это ограничение, хакеры придумали несколько способов сохранения серификатов SHSH, которые впоследствии позволяют откатиться на уже не актуальную прошивку. Ранее сохранить их можно было при входе в Cydia (магазин взломанных приложений и твиков) или с помощью инструмента . Однако, после того как Apple выпустила устройства с новыми процессорами, она ввела новый метод проверки, при котором ключи генерировались случайным образом при каждом восстановлении прошивки.

Тем не менее, спустя несколько лет разработчик Notcom вновь нашёл способ сохранения сертификатов не только для предыдущих моделей iPhone, iPad или iPod, но и для 64-разрядных устройств. В минувшие выходные он выпустил обновлённую и, как заявляет разработчик, полностью переписанную с нуля версию TinyUmbrella, позволяющую сохранять сертификаты SHSH для любого мобильного устройства Apple, в том числе для iPhone 6, iPhone 6 Plus и iPad Air 2.

Обновлённая версия TinyUmbrella имеет много общего с предыдущими версиями этого инструмента, поэтому, если раньше вы уже пользовались им, у вас не возникнет особых проблем. Тем не менее, в нём появилось немало изменений и улучшений, поэтому мы решили не обновлять наш предыдущий мануал, и вместо этого опубликовать новую инструкцию, в которой расскажем как сохранить сертификаты SHSH для iPhone, iPad или iPod с помощью нового TinyUmbrella.

Как установить TinyUmbrella

Внимание! Для использования TinyUmbrella на вашем компьютере должен быть обязательно установлен iTunes.

1. Запустите TinyUmbrella.
2. Подключите iPhone, iPad или iPod к компьютеру, после чего TinyUmbrella должен автоматически распознать ваше устройство и начать сохранение всех доступных сертификатов SHSH для прошивки, в настоящее время подписываемой Apple.

Где хранятся сертификаты SHSH?

Cертификаты SHSH хранятся здесь:

~/.tu/.shsh

Почему сохраняется только один файл для моего устройства?

В отличие от предыдущих версий TinyUmbrella, новая версия этого инструмента сохраняет сертификаты SHSH для одного устройства в одном файле.

Если в настоящее время на вашем устройстве установлена одна из предыдущих версий iOS, то TinyUmbrella не сможет сохранить сертификаты SHSH для этой прошивки. Дело в том, что TinyUmbrella позволяет сохранять сертификаты SHSH только для тех прошивок, которые на данный момент подписываются Apple.

Как очистить историю TinyUmbrella?

По-умолчанию TinyUmbrella сохраняет историю всех устройств, которые были подключены к компьютеру во время её работы. Это очень удобно, но, если вы хотите очистить историю для каких-либо устройств, перейдите в следующую папку:

~/.tu/.known_devices

Могу ли я откатить прошивку прямо сейчас?

Пока ещё нет. Как уже упоминалось ранее, на данный момент разработчик только тестирует новую версию TinyUmbrella, но, возможно, уже в следующей версии этого инструмента, он добавит возможность откатить прошивку на более раннюю версию.